Grundfos CIM 500

A.1.12. GENIpro TCP port settings
This web page is only present when the Modbus TCP protocol has been selected, SW1 is in position 1.
The module can connect to a Grundfos PC T
ool and communicate with the product via the GENIpro TCP
protocol.
TM074520
GENIpro TCP port settings
Object Description
Enable GENIpro
TCP
For enabling or disabling the GENIpro TCP protocol.
Default: Disabled.
TCP Port Number
The TCP port number of the module and that of the PC Tool must be identical.
Default: 49152, IANA public port.
294
Appendix A