Grundfos Conlift1 LS User Manual

English (GB)
9
9. Technical data
Supply voltage
1 x 230 VAC - 6 %/+ 6 %, 50 Hz, PE.
See the nameplate.
Input power
P1 = 70 W.
Input current
I = 0.65 A.
Alarm connection
An external alarm can be connected via the safety
overflow switch.
The cable can stand a control voltage of 250 VAC,
2.5 A.
Cable lengths
Power supply cable: 2.0 metres.
Alarm cable: 1.7 metres.
Storage temperature
When stored in dry rooms:
• Empty tank: -10 - +50 °C.
• Tank with condensate: above 0 °C (risk of frost
not allowed).
Ambient temperature
During operation: 5-35 °C.
Liquid temperature
Average temperature: 50 °C.
Maximum head
5.5 metres.
Maximum flow rate
600 l/h.
pH value of condensate
2.5 or higher.
Density of condensate
Maximum 1000 kg/m
3
.
Motor protection
• Thermal overload switch: 120 °C.
• Insulation class: F.
Enclosure class
IP20.
Weight
2.0 kg.
Volume
• Tank volume: 2.65 litres.
• Useful volume: 0.9 litre.
• Alarm condition: 2.1 litres.
• Operating condition: 1.7 litres.
Dimensions
See dimensional sketches on page 11.
10. Disposal
This product or parts of it must be disposed of in an
environmentally sound way:
1. Use the public or private waste collection service.
2. If this is not possible, contact the nearest
Grundfos company or service workshop.

Grundfos Conlift1 LS Specifications

General

Supply Voltage	230 V
Mains Frequency	50 Hz
Protection Class	IP24
Type	Condensate removal pump
Max Liquid Temperature	50°C
Housing Material	Plastic
Power Supply	230 V
Pumped Liquids	Condensate water
Outlet Connection	Multiple stepped hose connectors