English (GB)
67
1)
Only available if an advanced functional module, type FM 300, is fitted.
"LiqTec"
1)
Not active Not active -
1)
45
"Detection delay time"
1)
40 seconds 40 seconds -
1)
Standstill heating Not active Not active Not active 48
Motor bearing monitoring Active Active Active 48
"Pump name" - - - 51
"Connection code" - - - 52
"Unit configuration" SI SI SI 50
Settings
CRE, CRIE, CRNE, SPKE, MTRE
Function
description
on page
With
factory-fitted
sensor
Without
factory-fitted
sensor
CME
To Next Page
Loading...
