Grundfos CRIE User Manual

English (GB)
25
12.2 Menu overview for Grundfos GO
1)
Only available if an advanced functional module, type FM 300, is fitted.
2)
Only available if Grundfos GO is connected to a multipump system.
Dashboard
CRE, CRIE,
CRNE,
SPKE, MTRE
CME
Multipump
system
●●●
"Status"
CRE, CRIE,
CRNE,
SPKE, MTRE
CME
Multipump
system
"System mode" ●
2)
"Resulting setpoint" ●●
"Resulting system setpoint" ●
2)
"Actual controlled value" ●●●
2)
"Motor speed" ●●
"Power consumption" ●●
"Power cons., sys." ●
2)
"Energy consumption" ●●
"Energy cons., sys." ●
2)
"Acc. flow, specific energy" ●●●
2)
"Operating hours" ●●
"Operating hours, system" ●
2)
"Pt100/1000 input 1" ●●
1)
"Pt100/1000 input 2" ●●
1)
"Analog output" ●●
1)
"Analog input 1" ●●
"Analog input 2" ●●
"Analog input 3" ●●
1)
"Digital input 1" ●●
"Digital input 2" ●●
1)
"Digital in/output 3" ●●
"Digital in/output 4" ●●
1)
"Fitted modules" ●●
"Pump 1" ●
2)
"Pump 2" ●
2)
"Pump 3" ●
2)
"Pump 4" ●
2)

Grundfos CRIE Specifications

General

Frequency	50/60 Hz
Material	Stainless Steel
Flow Rate	Up to 120 m³/h
Pumped Liquid	Clean, non-aggressive liquids
Voltage	220-240 V / 380-415 V