Grundfos DMS 2 User Manual

13
4.7 Resetting
When “DEFAULT” is activated, the pump will return
to the factory settings.
Note: The calibration is also set back to the default
setting. This means that a new calibration is required
when the “DEFAULT” function has been used.
Fig. 6
4.8 Return
Fig. 7
The “RETURN” function makes it possible to return
from any level in the menu to the operating display
without changes after the menu functions have been
used.
Operating display Operating display
without changes

Grundfos DMS 2 Specifications

General

Brand	Grundfos
Model	DMS 2
Category	Water Pump
Language	English