English (GB)
4
2.2 Mechanical installation
2.2.1 Foundation
Place the pump on a plate or on bricks so that the
inlet strainer is free of silt, mud or similar materials.
2.2.2 Lifting the product
Lift the pump by the lifting handle. Never lift the
pump by the power cable. Tie a rope to the lifting
handle instead.
Fig. 4 Lifting the pump
2.2.3 Positioning the product
The pump can be tilted up to 15 ° from vertical
position.
During operation, the pump must be covered by the
pumped liquid to ensure efficient cooling.
Fig. 5 Positioning
2.2.4 Connecting the outlet pipe
The outlet pipe can be connected to the pump outlet
port by means of the 90 ° adapter.
Fig. 6 Connecting the outlet pipe
Outlet port threads
TM06 8030 4716TM06 8031 4716
TM06 8033 4716
Pump Thread
KPC 24/7
Rp 1
KPC 300 A
KPC 600 A Rp 1 1/4
To Next Page
Loading...
Need help?
General
