Need help?Do you have a question about the Grundfos KP and is the answer not in the manual?
General| Maximum submersion depth | 10 m |
|---|---|
| Enclosure class | IP68 |
| Installation | Submersible |
| Motor protection | Thermal overload protection |
| Type | Submersible pump |
| Power supply | 230V, 50Hz |
| Material | Stainless steel |
| Application | Drainage |
| Liquid Temperature | 0°C to +40°C |
| Maximum particle size | 10 mm |
| Max Liquid Temperature | 40°C |
| Max head | Up to 9 m (depending on model) |
| Weight | 5-10 kg |
| Cable length | 5-10 m (depending on model) |
Details piping, inlet pipe selection, and connections.
Procedures for motor wiring, controllers, and VFDs.
Information on shaft seals, stuffing boxes, and coupling alignment.
Steps for preparing and disassembling the pump.
Detailed instructions for replacing bearings, seals, and packing.
Steps for reassembling the pump after servicing.
To Next Page