Need help?Do you have a question about the Grundfos Unilift KP 250 and is the answer not in the manual?
General| Type | Submersible drainage pump |
|---|---|
| Max Head | 7.5 m |
| Frequency | 50 Hz |
| Maximum Submersion Depth | 10 m |
| Liquid Temperature Range | 0 °C to +40 °C |
| Density | 1000 kg/m³ |
| Enclosure Class | IP68 |
| Installation | Submersible |
| Inlet Strainer | Yes |
| Cable Length | 10 m |
| Protection Class | IP68 |
| Voltage | 230 V |
| Maximum Liquid Temperature | 40 °C |
| Approvals | CE |
| Rated Voltage | 230 V |
| Starting Method | Direct-on-line |
Explains the meaning of symbols used in the manual and on the product.
Guidelines for safe transport, inspection, and scope of delivery.
General guidelines, inlet choices, and site selection for the lifting station.
Covers tools, tank drilling, positioning, and connecting inlet pipes.
Details fitting vents, cable glands, pumps, and assembling discharge pipes.
Instructions for level sensors, alarm switches, and diaphragm pumps.
Guides electrical connections and setting the controller before startup.
Procedures for starting the lifting station with or without a controller.
Guidelines and precautions for storing the product.
Overview of product features, applications, and pumped liquids.
Information on the nameplate, type key, diaphragm pump, and level sensor.
Explains how to adjust pump start levels for optimal performance.
Covers product maintenance, servicing, and safe decommissioning procedures.
Lists operating conditions, materials, dimensions, and weights.
Lists common faults, their causes, and recommended solutions.
Instructions for disposing of the product in an environmentally responsible manner.
To Next Page
