Do you have a question about the Grundfos KP 150 and is the answer not in the manual?
Outlines the pump's suitability for various wastewater and drainage tasks.
Details temperature limits, voltage variants, and installation depth for optimal pump function.
Specifies the A-weighted sound pressure level, measured according to ISO 3743.
Provides instructions to verify the correct motor rotation direction for three-phase pumps.
Explains the connection of discharge pipes or hoses to the pump's Rp 1½ port.
Guides on positioning the pump vertically or horizontally for optimal operation and safety.
Details how to adjust pump start/stop levels by modifying float switch cable length.
Describes the non-adjustable start/stop levels for pumps equipped with a vertical level switch.
Provides steps to dismantle and clean the pump, strainer, and impeller when flow is reduced.
Lists replaceable parts like impeller and housing with corresponding part numbers.
| Cable Length | 10 m |
|---|---|
| Protection Class | IP68 |
| Passage for Solids | 10 mm |
| Frequency | 50 Hz |
| Housing Material | Stainless steel |
| Voltage | 230 V |
| Pump Type | Submersible |












Loading...