Need help?Do you have a question about the Grundfos Unilift KP 150 and is the answer not in the manual?
Symbols and statements indicating hazardous situations.
How to connect pipes and recommendations for fittings.
Adjust float switch cable for start/stop levels.
Instructions for safe electrical connection and grounding.
Procedure and checks before starting the pump.
Explains how the float switch enables automatic operation.
Step-by-step guide to dismantle and clean the pump.
General| Type | Submersible pump |
|---|---|
| Max Head | 7.5 m |
| Power | 0.45 kW |
| Voltage | 220-240 V |
| Weight | 5.5 kg |
| Maximum Submersion Depth | 10 m |
| Rated Power - P2 | 0.15 kW |
| Mains Frequency | 50 Hz |
| Rated Voltage | 230 V |
| Enclosure Class | IP68 |
| Insulation Class | F |
| Max Liquid Temperature | 50°C |
| Protection Class | IP68 |
| Liquid Temperature Range | 0°C to +50°C |
| Outlet | 1 1/4" |
To Next Page
