Grundfos Unilift KP 150 User Manual

4
English (US)
2.2 Notes
The symbols and notes below may appear in
Grundfos installation and operating instructions,
safety instructions and service instructions.
2.3 Overview drawing
Fig. 1 Unilift KP pump
3. Receiving the product
3.1 Inspecting the product
Check that the product received is in
accordance with the order.
Check that the voltage and frequency of the
product match the voltage and frequency of the
installation site.
3.2 Scope of delivery
The box contains the following items:
• pump
• power cable
• float switch (if included with the model)
• installation and operating instructions.
Observe these instructions for
explosion-proof products.
A blue or grey circle with a white
graphical symbol indicates that an
action must be taken.
A red or grey circle with a diagonal
bar, possibly with a black graphical
symbol, indicates that an action must
not be taken or must be stopped.
If these instructions are not observed,
it may result in malfunction or damage
to the equipment.
Tips and advice that make the work
easier.
TM03 4327 2006
Pos. Description
1 Outlet port 1.25" NPT
2 Handle
3Clamp
4 Inlet strainer
5 Pump housing
6 Float switch (optional)
With float switch
CAUTION
Crushing of feet
Minor or moderate personal injury
- Wear safety shoes when handling
the product.
- Use the pump handle to move the
pump. Do not lift it by the power
cable.

Grundfos Unilift KP 150 Specifications

General

Brand	Grundfos
Model	Unilift KP 150
Category	Water Pump
Language	English