Grundfos MAGNA3 Series Instructions

English (GB)
2
English (GB) Service kit instructions
CONTENTS
Page
English (GB)
Dansk (DK)
1. MAGNA3
8
1.1 Dismantling the product
8
1.2 Assembling the product
12
Warning
Before starting service work, read the safety instructions supplied
with the product.
Warning
Always use an antistatic service kit when handling electronic
components. This will prevent static electricity from damaging
components. See figure below.
When unprotected, the component must be placed on the
antistatic cloth.
Advarsel
Læs sikkerhedsanvisningerne der blev leveret med produktet, før
du foretager servicearbejde.
Advarsel
Brug altid et antistatisk servicesæt når du håndterer elektroniske
komponenter. Dette forhindrer at komponenter beskadiges af
statisk elektricitet. Se nedenstående figur.
Når komponenten er ubeskyttet, skal den placeres på det
antistatiske klæde.
Pumpland.ru

Grundfos MAGNA3 Series Specifications

General

Temperature Range	-10 °C to +110 °C
Insulation Class	F
Series	MAGNA3
Max. Liquid Temperature	110 °C
Power Supply	1x230V, 3x400V
Approvals	CE
Pump Housing	Cast iron
Installation	Inline
Communication	Modbus RTU, BACnet MS/TP
Ambient Temperature	0 °C to 40 °C
Material	Cast iron