Need help?Do you have a question about the Grundfos RSI Series and is the answer not in the manual?
General| Category | Inverter |
|---|---|
| Output Voltage | 0-Input Voltage |
| Output Frequency | 0-400 Hz |
| Protection Class | IP20 |
| Type | Variable Frequency Drive |
| Input Voltage | 3x380-480V AC |
| Input Frequency | 50/60 Hz |
| Control Method | Sensorless Vector Control |
| Ambient Temperature | -10°C to +50°C |
| Relative Humidity | 5% to 95%, non-condensing |
| Altitude | Up to 1000 m above sea level |
| Product Series | RSI Series |
| Cooling Method | Forced Air Cooling |
| Communication Interfaces | Modbus RTU |
Explains the meaning of symbols and safety warnings used in the manual.
Guides the user on checking the inverter's condition before installation.
Details product variants, frame sizes, and physical dimensions.
Lists electrical data for the 3 x 208-240 V range.
Lists electrical data for the 3 x 380-415 V range.
Illustrates mounting and required space for optimal cooling.
Explains wiring terminals for power supply and motor connections.
Describes the control panel layout, LEDs, and basic operating keys.
Details the start-up wizard steps for initial product configuration.
Lists key parameters for initial setup and their default settings.
Comprehensive list of fault codes, their probable causes, and recommended solutions.
Outlines annual inspection procedures and essential safety precautions.
Covers inspection and replacement of components like cooling fans.
Provides instructions for product storage and details warranty exclusions.
To Next Page
