English (GB)
2
English (GB) Installation and operating instructions
Original installation and operating instructions
CONTENTS
Page
1. Symbols used in this document
2. Purchase inspection before
installation
If any deviation from the order is found, please
contact Grundfos. Once you get the product, please
perform the following inspections before installation:
1. Symbols used in this document
2
2. Purchase inspection before installation
2
3. Technical data
3
3.1 Product range
3
3.2 Technical data
6
4. Installation
7
4.1 Installation example
7
4.2 Electrical connection
8
5. Operation
9
5.1 Control panel
9
5.2 Control panel operation
11
5.3 Quick setup parameter description
13
6. Fault finding
14
6.1 Fault codes and remedies
14
6.2 Fault codes reset
20
6.3 Fault history
20
7. Service and maintenance
20
7.1 Routine inspection
20
7.2 Inspection and replacement of wear parts
22
7.3 Storage and warranty
22
8. Disposal
22
Warning
Prior to installation, read these installation
and operating instructions. Installation and
operation must comply with local
regulations and accepted codes of good
practice.
Advanced IO
http://net.grundfos.com/Appl/
ccmsservices/public/literature/filedata/
Grundfosliterature-5261450.pdf
Warning
If these safety instructions are not
observed, it may result in personal injury.
Warning
If these instructions are not observed, it
may lead to electric shock with consequent
risk of serious personal injury or death.
Warning
The surface of the product may be so hot
that it may cause burns or personal injury.
To Next Page
Loading...