Need help?Do you have a question about the Grundfos S2 and is the answer not in the manual?
General| Type | Submersible Pump |
|---|---|
| Max Liquid Temperature | Up to 40°C |
| Application | Drainage, sewage, wastewater |
| Impeller type | Vortex impeller |
| Frequency | 50 Hz |
| Housing Material | Cast iron |
Symbols and notes providing safety warnings, tips, and advice for users.
Identifies the intended audience for these installation and operating instructions.
Details pump description, identification system, intended use, and pumped liquids.
Lists pump approvals and discusses safe use in potentially explosive environments.
Covers safe transport, lifting points, and general handling precautions for the pump.
Details initial mechanical steps, foundation requirements, and mounting procedures.
Covers mounting on auto-coupling, dry installations, and column pipe installations.
Provides instructions for safe electrical connection and illustrates wiring diagrams.
Discusses considerations and requirements for operating the pump with a frequency converter.
Explains motor protection devices, level controllers, and the IO 113 interface.
Describes the SM 113 module, switches, and sensors for data collection and monitoring.
Outlines pre-startup checks, liquid level requirements, and start/stop levels for different installations.
Explains how to verify rotation direction and perform the initial pump start-up.
Covers safe handling, lifting, and storage instructions for the pump.
Lists safety for service, maintenance schedules, and oil check procedures.
Details impeller clearance inspection and adjustment for submersible and dry-installed pumps.
Details operating conditions (pH, temp, density, velocity) and electrical data.
Lists net weights and refers to external data for pump dimensions.
To Next Page
