Grundfos SE - Permanent, Vertical or Horizontal, Dry Installation

TM075949
Lowering the pump along the guide rails
TM075952
Connecting the pump to auto coupling
TM075109
Submerged installation on auto coupling
Pull-out strength for anchor bolts
Auto-coupling
base unit
Bolts
[mm]
Pull-out strength
for a single bolt
[kN]
DN 80/100 M16 10
DN 100 M16 10
DN 150 M16 10
DN 200 M24 10
DN 250 M24 10
DN 300 M24 12
The pull-out strengths stated are without
safety factor. The required safety factor
may depend on the materials and method
used for anchoring.
4.4 Permanent, vertical or horizontal, dry
installation
Use isolating valves on either side of the
pump to facilitate service on it.
15
English (GB)