Grundfos SEG Series - Replacing the Grinder System

Appendix
22
Weights
Power
[hp (kW)]
Weight
[lb (kg)]
SEG.A15
2.0 (1 phase) (1.5) 101.4 (46)
2.0 (3 phase) (1.5) 101.4 (46)
3.0 (2.6) 101.4 (46)
4.0 and 5.5 (3.1 and 4.0) 178.6 (81)
SEG.A20
3.0 (2.6) 101.4 (46)
4.0 and 5.5 (3.1 and 4.0) 178.6 (81)
Pos. Designation GB
6a Pin
7a Rivet
9a Key
37a O-rings
44 Grinder ring
45 Grinder head
48 Stator
48a Terminal board
49 Impeller
50 Pump housing
55 Stator housing
58 Shaft seal carrier
66 Locking ring
68 Adjusting nut
76 Nameplate
92 Clamp
102 O-ring
103 Bush
104 Seal ring
105
105a
Shaft seal
107 O-rings
112a Locking ring
153 Bearing
154 Bearing
155 Oil chamber
158 Corrugated spring
159 Washer
172 Rotor/shaft
173 Screw
173a Washer
176 Inner plug part
181 Outer plug part
188a Screw
190 Lifting bracket
193 Oil screw
193a Oil
194 Gasket
198 O-ring