5
English (US)
5. Identification
5.1 Nameplate
The nameplate states the operating data and approvals applying
to the pump. The nameplate is fixed with rivets to the side of the
stator housing near the cable input to the motor.
Fix the additional nameplate supplied with the pump close to the
pit.
Fig. 3 SEG nameplate
* For USA and Canada
TM06 5866 0216
Pos. Description Pos. Description
1 FM description 16 Mark for continuously operated motor
2 Type designation 17 Enclosure class
3 Product number + serial number 18 Phases
4 Maximum liquid temperature 19 Service factor
5 Production code (YYWW) 20 Maximum installation depth [ft]
6 Speed [rpm] 21 Maximum flow rate [US gpm]
7 Maximum head [ft] 22 Rated power output [hp]
8 Rated power input [hp] 23 Rated current,
Δ
9 Rated voltage, Δ 24 Rated current, Y
10 Rated voltage, Y 25 Cos φ, 1/1 load
11 Starting capacitor [µF] 26 Net weight [lbs]
12 Run capacitor [µF] 27 Insulation class
13 Frequency [Hz] 28 Production country
14 Electrical safety* 29 Grundfos logo
15 Approvals
1
2
3
4
5
6
7
9
10
11
12
13
14
8
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
US
C
ij
~
To Next Page
Loading...
