English (GB)
5
English (GB) Installation and operating instructions
Original installation and operating instructions.
CONTENTS
Page
1. Symbols used in this document
1. Symbols used in this document
5
2. General description
6
2.1 Application
6
2.2 Nameplate
6
2.3 Installation kit
6
3. Configuration
7
3.1 ST5 - supply voltage
8
3.2 ST3 and ST4 - sensor inputs
8
3.3 ST1 and ST2 - signal outputs
9
3.4 Configuration examples
10
4. Installation
12
4.1 Mounting
12
4.2 Electrical connection
13
4.2.1 Connection of supply voltage and sensor 14
5. Technical data
16
6. Disposal
17
Warning
Prior to installation, read these installation and operating
instructions. Installation and operation must comply with local
regulations and accepted codes of good practice.
Warning
If these safety instructions are not observed, it may result in
personal injury!
If these safety instructions are not observed, it may result in
malfunction or damage to the equipment!
Notes or instructions that make the job easier and ensure safe
operation.
To Next Page
Loading...