English (GB)
18
5.5 Identification
5.5.1 Nameplate
Fig. 21 Nameplate
5.5.2 Type key
5.6 Diaphragm pump
We recommend to connect a diaphragm pump to the
tank. It is a positive displacement pump which can
be operated manually. It can be used to drain the
tank before service or during power cuts. The tank
has a pre-built inlet DN 40 especially designed for it.
5.7 Level sensor tube
The level sensor is an accessory, which works
together with a controller LC 220 or LC 221.
The level sensor tube is connected to a
piezoresistive level sensor in the controller via its
pressure hose.
The rising liquid level compresses the air inside the
pressure tube and pressure hose, and the
piezoresistive sensor transforms the changing
pressure into an analogue signal. The controller
uses the analogue signal to start and stop the pump
and to indicate high water level alarm.
TM061249 3414
Pos. Description
1 Product number
2 Production site
3 Type of designation
4 Country of origin
5Weight
6 Production code
7
Installation and operating instructions,
publication number
8 Not filled in
UNOLIFT 270. 40. CC
Model
Unolift: one pump
Duolift: two pumps
Tank volume
[L]
270
540
Outlet DN 40
Pump
CC
KP
APB, APB
SEG
Type
Standards used: EN 12050-1 or EN 12050-2
Model
Weight
P.c.
Made in
EU declaration of performance
Denmark
P10
98646710
1325
Notified body:0197
DK-8850 Bjerringbro, Denmark
98495490
To Next Page
Loading...
Need help?
General
