ENGLISH
12
EXTERNAL DATA MEDIA MODE
-------------------------------------------------------
Charging a USB Device
Your Micro HiFi System include a USB port at
the back. This allow you to charge a USB De-
vice using the Micro HiFi System.
1 Connect your USB using the USB cable into
the »
5V 1A
« socket.
– The USB Device will begin to charge.
Notes:
7
The Micro HiFi System switches off automati-
cally after approx. 15 minutes.
7
Power output of the USB port is 1A. If your
device require more power may not charge
through this USB port.
7
Charging function may not be support for all
smartphones, tablets or electronic devices.
Caution:
7
To ensure the device is splashproof, close the
rubber cover of the sockets tightly.
Selecting the input source
1 Select the input source (»CD« or »USB«) by
pressing » «.
– Playback starts automatically.
Note:
7
If no data medium is inserted/connected, the
message »NO DISC« or »NO USB« appears.
Inserting/connecting music data
media
Inserting the disc
1 Press ».« to open the CD compartment.
– The CD compartment opens.
2 Put in the disc with its label facing upwards.
3 Press ».« to close the CD compartment.
– The disc is read.
– Display in MP3/WMA mode: the total number
of albums and tracks.
– Display in CD-DA mode: the total number of
tracks and the total playing time.
4 Playback starts automatically.
Connecting an MP3 player or a USB
memory stick
1 Switch the device to standby mode by pressing
»8«.
2 Connect the USB interface of the MP3 player
to the » « socket of the hi-fi system with a
standard USB cable;
or
insert the USB plug of the USB memory stick
into the USB interface » « of the hi-fi sys-
tem.
3 Switch on the device from standby by pressing
»8«.
– Display: the total number of albums and tracks.
Playback
Pausing and resuming playback
1 Press »eII« to pause playback.
– Display: the playing time flashes.
2 Resume playback with »eII«.
– Display: number of folders and tracks or
track information and the elapsed playing
time.
Resuming playback
1 Pause playback by selecting another input
source or press »8«.
– If you select the data medium again, play-
back continues from the point at which it
stopped.
Stopping playback
1 To stop playback, press »
7
«.
– When playback starts again, it begins from
the first track.
Repeating the current track
1 Press »REP« briefly during playback.
Selecting another track or folder
When you play music CDs, you can select the
track; when you play MP3/WMA files, you can
also select folders.