EasyManuals Logo

Grundig CMS 3000 User Manual

Grundig CMS 3000
36 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #9 background imageLoading...
Page #9 background image
9
ENGLISH
Switching on and off
The only way to disconnect the hi-fi system from
the mains supply is to pull out the plug.
1 Switch on the hi-fi by pressing »8«.
The last input source used is automatically
selected.
2 Switch the hi-fi system to standby mode by
pressing »8«.
CLOCK mode
The hi-fi system switches to standby in the CLOCK-
mode after 15 minutes. This lowers the power con-
sumption to below 1 W.
Automatic Standby
The device switches to standby mode automati-
cally after 15 minutes if:
– the device is in the stop position;
there is no audio signal detected at the
»AUDIO IN« socket;
the Bluetooth auxiliary devices is not sending
an audio signal.
To use the device, switch it back on.
GENERAL FUNCTIONS
---------------------------------------------------------------------------------------
Adjusting the volume
1 Turn the control knob on the hi-fi system or press
»
VOL +
«
on the remote control to change
the volume.
Selecting sound settings
You can choose between preset sound settings.
1 Select the sound setting using »EQ« on the re-
mote control.
Muting
You can switch the hi-fi speakers to and from
mute mode with this function.
1 Activate mute with » « on the remote control.
2 Deactivate mute with » « on the remote con-
trol.
Displaying the time
1 Display the time with »
CLOCK
« on the remote
control.
Automatic station search for FM
radio stations
1 Switch on the hi-fi system by pressing »8«.
2 Select TUNER with » « on the remote con-
trol or » « on the appliance
3 For the automatic station search press briefly
»AUTO« on the remote control.
The device searches for up to 40 stations
with strong reception and stores them auto-
matically. After the search has finished, you
will hear the station stored at preset 01.
Notes:
7
You can cancel the automatic station search by
pressing »
7
«.
7
You can restart the automatic station search by
pressing briefly »AUTO« until the frequency
display changes to rapid run-through.
Setting and storing radio stations
manually
1 Set the radio station by briefly pressing »
TUNE+ « or » TUNE- « repeatedly.
Display: the frequency changes in steps of
50 kHz;
or
press and hold down » TUNE+ « or » TUNE-
« until the frequency changes to rapid run-
through.
2 Once find a favorite radio station, long press
» MEMORY/PROG « button 3 seconds.
Radio preset is starting from 01
3 Select preset station number from 01 to 40 by
press » TUNE + / TUN - « and then press
» PLAY/PAUSE « to confirm. » STORED «
word is displayed on the screen.
4 Repeat step 1,2 to complete more radio
storage.
TUNER MODE
------------------------------------------------------------------------------------------------------------------------

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Grundig CMS 3000 and is the answer not in the manual?

Grundig CMS 3000 Specifications

General IconGeneral
BrandGrundig
ModelCMS 3000
CategoryStereo System
LanguageEnglish

Related product manuals