ENGLISH
36
SETTINGS
---------------------------------------------------------------------------------------------------------------------------------------
Sorting channels
You can sort the station list stored during the sta-
tion search in three different ways.
– »Alphanumeric«: all stations are sorted alpha-
numerically (default setting).
– »Ensemble«: all stations are sorted by ensemble.
– »Valid«: active stations are listed first, stations
that are not active are shown with a question
mark.
1 Press »MENU« to open the DAB menu.
2 Select the option »Station order« by pressing
»
« or » « or by turning the Volume Knob
and confirm by pressing »OK«.
3 Select your settings by pressing »
« or » «
or by turning the Volume Knob and confirm by
pressing »OK«.
Setting FM stations
Setting the search mode
There are two different automatic scan setting
modes.
1 To enter FM mode, either press »Menu« but-
ton --> select “Main menu” --> FM or press
»MODE« button then turn the Volume knob
clockwise or anticlockwise to scroll left or right
through the mode list until FM Radio is high-
lighted and press »OK«.
2 Press »MENU« to open the »FM« menu.
3 Select the option »Scan setting« by pressing
»
« or » « or by turning the Volume Knob
and confirm by pressing »OK«.
– Display: »Strong stations only?«.
4 Select your setting (»YES« or »NO«) using
»
« or » « or by turning the Volume Knob and
confirm by pressing »OK«.
5 Press »MENU« to end the setting.
Automatic station search
1 Press and hold » « or » « or press the Volume
Knob. When you release the button, the auto-
matic search stops at the next station.
Note:
7
Press Menu button and select the option
»ATS« and confirm by pressing »OK«. Select
the option »YES« and confirm by pressing
»OK«. The automatic station search starts,
searches and stores the radio stations.
Tuning stations manually
1 Move the frequency forward in brief steps by
repeatedly pressing »
« or » «.
– The frequency goes up or down in 50 kHz
steps.
Saving FM radio stations on presets
1 Search for the FM station as described.
2 To store station on a preset, press and hold
»OK« button until ‘‘favourites added’’ appears
on the display.
Note:
7
Long press »PRESET/BT PAIR« button until
the display shows the save preset screen.
7
Press »PRESET/BT PAIR« button the select
one of the preset stations. During the playing
»
1, 2...« appears on the display.
7
The 1 to 10/0 button on the remote control are
for the preset stations.
3 To store more stations, repeat steps 1 and 2 as
many times as necessary.
To Next Page
Loading...
