EasyManua.ls Logo

Grundig DTR 5000 - Bluetooth Mode; Bluetooth Device Compatibility; Selecting Bluetooth Source; Pairing Bluetooth Devices

Grundig DTR 5000
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ENGLISH
42
BLUETOOTH MODE
---------------------------------------------------------------------------------------------------
Bluetooth device compatibility
Your DTR 5000 2.0 BT DAB+ WEB, TR 3200 BT
DAB+ WEB connects with all Bluetooth devices
that support the A2DP profile including the most
smartphones, laptops and tablets.
Selecting the input source Bluetooth
1 To enter Bluetooth Audio mode, either press
and hold »Menu/INFO« button on the device
--> select »Main Menu« --> Bluetooth or press
»MENU« button on remote control and apply
same procedure as above.
Display: Bluetooth icon flashing on the bot-
tom right corner of the display.
Pairing Bluetooth device
1 Activate on the Bluetooth device the Bluetooth
function.
2 Start on the Bluetooth device the search func-
tion.
After a short period of time, your Grundig
DTR5000, TR3200 is displayed on the Blue-
tooth device.
3 Select the Grundig DTR5000, TR3200 on the
Bluetooth device and connect it.
4 Once the Bluetooth device is connected to your
device, the BT icon becomes steady.
Note:
7
Although the DTR 5000 2.0 BT DAB+ WEB,
TR 3200 BT DAB+ WEB can only stream au-
dio from one device at a time, it is capable of
being paired with up to eight devices.
Connecting a paired Bluetooth
Device
Notes:
7
You will only need to pair your Bluetooth de-
vice with the unit one time.
7
The next time your Bluetooth device and the
DTR 5000 2.0 BT DAB+ WEB, TR 3200 BT
DAB+ WEB are in range of each other, and
the Bluetooth feature is turned on, they will
automatically connect.
7
The DTR 5000 2.0 BT DAB+ WEB, TR 3200
BT DAB+ WEB will only automatically connect
to the last Bluetooth Device it was connected
to.
7
If your paired device does not automatically
connect, navigate to the Bluetooth menu on
your device and select the unit from the list.
Play Audio signal from your Blue-
tooth device
1 Start playback on the Bluetooth Device.
2 Adjust the volume using »
« or » « .
3 End playback on the Bluetooth Device.
Notes:
7
Various functions may also be controlled
from the DTR 5000 2.0 BT DAB+ WEB, TR
3200 BT DAB+ WEB. Select Playback-Pause
using »
eII«, press »eII« again to resume
playback; select previous title by pressing »
«, select next title by pressing » «.
7
Keep in mind that depending on the used
Bluetooth device and the structual conditions
the wireless range can be up to 9 m.
Disconnect the Bluetooth device
1 Switch off the Bluetooth function at
the Bluetooth device or long press
»PRESET/BT PAIR« button.
Display changes to: Flashing BT icon.

Table of Contents

Related product manuals