Grundig DTR 5000 - FM Mode; Selecting FM Input Source; Selecting FM Stations; Setting Stereo;Mono Reception

41
ENGLISH
FM MODE
--------------------------------------------------------------------------------------------------------------------------------------
Selecting the tuner input source
1 For the main menu way, press and hold
»Menu/INFO« on the device, or press
»MENU« on remote control right through the
mode list until DAB radio is highlighted and
press »OK«.
Selecting stations – from presets
1 In the »FM radio« mode, press »1« to »10« on
the remote control to select the presets from 1
to 10.
Selecting stations – from the list
Recall Preset
1 Press » «.
2 Select the presets from 1 to 10 by pressing
»
« or » « or by turning the Volume Knob.
3 Confirm the preset by pressing »OK«.
Setting stereo or mono reception
1 Press »MENU« to open the menu.
2 Select the option »Audio setting« by pressing
»
« or » « or by turning the Volume Knob
and confirm by pressing »OK«.
3 Switch to mono reception by selecting the
»YES« button using »
« or » « or by turning the
Volume Knob and confirm by pressing »OK«.
Stereo reception is set using the »NO« button.
4 Press »MENU« to end the setting.