39
ENGLISH
USB MODE
----------------------------------------------------------------------------------------------------------------------------------
Playing the contents of a USB
memory stick
1 If switching off the device from standby mode
press and hold »8/MODE « on the device or
press »
8« on the remote control.
2 Connect the USB interface of the MP3 player
to the »USB« socket on the device (on the
back side), using a standard USB cable;
or
insert the USB plug of the USB memory stick
in the »USB« socket (on the back side) on the
device.
3 If switching on the device from standby mode
press and hold »
8/MODE « on the device or
press »
8« on the remote control.
4 To enter Music player mode, either press
»Menu« button --> select “Main menu” -->
Music player or press »MODE« button then
turn the Volume knob clockwise or anticlock-
wise to scroll left or right through the mode
list until Music player is highlighted and press
»OK«.
– Display: »Music player« submenu opens.
5 Select the option »USB playback« by pressing
»
« or » « or by turning the Volume Knob
and confirm by pressing »OK«.
– The content of the USB appears in the dis-
play.
Note:
7
If no USB memory stick has been inserted,
»No USB device found« appears in the dis-
play after a short time. Insert the USB by re-
ferring to the “Connecting an MP3 player or
a USB memory stick” section.
6 Select the file or track by pressing »
« or » «
or by turning the Volume Knob.
7 Press »OK« to start playback.
– Display: Playback starts, elapsed playing
time, total playing time and file information
appears in the display.
8 Press »
eII« on the remote control to play or
pause the playback. Press » « to play
previous/next track or press and hold them to
rewind / fast forward. Also, press »
7« to stop
the track and return to the track list.
To Next Page
Loading...
