43
ENGLISH
Reconnecting the Bluetooth device
1 If you move out of range or turn off the Blue-
tooth feature on your device, the unit will dis-
connect from your device.
2 To reconnect, simply access the Bluetooth
Manager on your Bluetooth device and select
the Grundig DTR5000, TR3200.
Note:
7
In case of the registered DTR 5000 2.0 BT
DAB+ WEB, TR 3200 BT DAB+ WEB can-
not connect to the Bluetooth device again,
please remove the Grundig DTR5000,
TR3200 from the Bluetooth device list,
search and connect again.
BLUETOOTH MODE
---------------------------------------------------------------------------------------------------
Automatic shutdown
If Bluetooth is selected as input source and no Blue-
tooth device is connected, the DTR 5000 2.0 BT
DAB+ WEB, TR 3200 BT DAB+ WEB switches
automatically to Stand-by mode after 15 minutes.
ALARM MODE
---------------------------------------------------------------------------------------------------------------------
Setting the alarm times and mode
1 Press »8« to switch on the device.
2 Press and hold »Menu/INFO« on the device,
select »Menu/INFO« → »ALARM«
3 Alternatively, press and hold »ALARM/
BACK« on the device or press »ALARM« on
remote control.
– Display: »Alarm 1 Off [00:00]« and
»Alarm 2: Off [00:00]«.
4 Select »Alarm 1« or »Alarm 2« with vol-
ume knob on the device or »
/ « on the re-
mote control.
5 Select the option »Alarm1 « with left and
right button and confirm by pressing »OK«.
– Display: »Alarm1 «.
6 Enable: Off, Daily, Once, Weekends or Week-
days [Select the option with volume knob on
the device or »
/ « on the remote control,
and confirmed by pressing »OK« ].
7 Time: [set hour and minute, with volume knob
on the device or »
/ « on the remote control,
and confirmed by pressing »OK« ].
8 Mode: »Buzzer, Internet radio,
DAB or FM« [Select the option with volume
knob on the device or »
/ « on the remote
control, and confirmed by pressing »OK« ].
9 Preset: Last listened, or Preset 1-10
(Internet radio, DAB or FM is set, no
such setting if Buzzer was selected) [Select the
option with volume knob on the device or »
/ « on the remote control, and confirmed by
pressing »OK« ]
10 Volume: 0-32 [adjust with volume knob on the
device or »
/ « on the remote control, and
confirmed by pressing »OK« ].
11 Save [confirmed by pressing »OK«, other-
wise the alarm setting is not saved].