Grundig GNU 41820 X User Manual

26
DISHWASHER / USER INSTRUCTIONS
/55 EN
Operating the product
Keys
On / Off key
It is used to turn on or off the machine.
Press the On / Off key for 1 second to turn
on. Buzzer will go off and machine will turn
on at the end of 1 second. Press the On /
Off key for 1 second to turn off. Buzzer will
go off and machine will turn off at the end of
1 second. To turn off while the programme is
running, keep Off key pressed for 3 seconds.
A countdown in the form of “3”, “2”, “1” will
appear on the display. Machine will turn off
with the end melody at the end of 3 seconds.
Machine will turn on with economy
programme in On mode and the number of
the economy programme will appear on the
programme indicator.
Start / Pause / Cancel key
It is used to start, pause or cancel the
selected programme or function.
Programme Selection keys
They are used to select the washing
programme you determined from the table of
“Programme data and average consumption
values”. Use up arrow to switch to the next
programme, and down arrow to switch to
the previous one. It returns to beginning or to
end after the first and last programs.
Function keys
Using auxiliary functions enable you to save
time, water and energy and to perform a
more comfortable washing with conditions
specific to you.
C
Same function keys are used for
Child (Key) Lock and Volume
Level Setting.
Time Delay key
It should be pressed to make the time delay
settings.
Preparing the machine
1. Open the tap.
2. Plug in to the socket.
3. Open the door of the dishwasher.
4. Place the dishes in accordance with the
instructions in the user manual.
5. Make sure that the upper and lower
impellers rotate freely.
6. Put adequate amount of detergent into
the detergent dispenser.
7. Check if the Salt and Rinse Aid
indicators light and add salt and/or
rinse aid if needed.
8. Close the door of the dishwasher.
Programme selection
1. Press On / Off key to turn on your
machine.
2. Refer to the table of “Programme data
and average consumption values”
to determine a washing programme
suitable for your dishes.
3. Press Programme Selection keys until the
number of the programme you selected
appears on the Programme indicator.
Use up arrow to switch to the next
programme, and down arrow to switch
to the previous one.

Grundig GNU 41820 X Specifications

General

Door color	Stainless steel
Control type	Buttons, Touch
Display type	LCD
Built-in display	Yes
Appliance placement	Undercounter
Control panel color	Black, Stainless steel
Noise level	44 dB
Delay start (max)	24 h
Number of place settings	13 place settings
Number of washing programs	8
Drying class	A
Annual water consumption	2800 L
Annual energy consumption	262 kWh
Water consumption per cycle	10 L
Energy consumption per cycle	0.92 kWh

Weight and Dimensions

Depth	548 mm
Width	598 mm
Height	820 mm