Grundig GNU 41820 X User Manual

30
DISHWASHER / USER INSTRUCTIONS
/55 EN
Operating the product
C
Pay attention not to open the
door of the machine when it is
running. Stop the machine by
pressing Start / Pause / Cancel
key if you have to open the
door. Then, open the door of
the machine. There may be a
rush of vapour when you open
the door of your machine; be
careful. Close the door of your
machine and press Start / Pause
/ Cancel key again. Programme
will resume running.
Programme follow-up
You can follow-up the washing step in
which the current programme is in from the
Programme Steps Follow-up indicator on the
display.
a) Washing Step indicator
b) Rinsing Step indicator
c) Drying Step indicator
d) End of Programme indicator
Indicators for Washing / Rinsing / Drying
will light respectively on the display
throughout the washing programme.
Indicator of a finished step will not go off,
but they will light by adding on each other.
When the programme is over, indicators of
washing steps go off and only the End of
Programme indicator lights.
C
None of the Programme Steps
Follow-up indicators will light
while the Time Delay is enabled.
C
The machine will remain silent
in pause mode for some time
in order to remove the water in
the machine and on the dishes
completely and to have the
water softener cleaned, and then
it will resume running in drying
mode.
Child (Key) Lock
You may prevent other people from
interrupting and changing the programme
cycle and time delay while the machine is
running.
To activate the child lock:
1. Press and hold the Child (Key) Lock key
for three seconds.
2. Display Information Line will show
“CL 3”, “CL 2”, “CL 1” and “ CL On”.
C
Child Lock prevents the selected
programme or functions from
being changed and disables the
Start / Pause / Cancel key.
C
Child Lock does not lock the
door of the machine.
C
If you turn your machine off
by using On/Off key at the
end of the programme, the
Child Lock will be deactivated
automatically.
C
If no key is pressed after the
programme is over, machine will
be automatically turned off after
5 minutes. Child Lock is disabled
once the machine is turned off.
To deactivate the Child Lock:
1. Press and hold the Child (Key) Lock key
for 3 seconds.

Grundig GNU 41820 X Specifications

General

Door color	Stainless steel
Control type	Buttons, Touch
Display type	LCD
Built-in display	Yes
Appliance placement	Undercounter
Control panel color	Black, Stainless steel
Noise level	44 dB
Delay start (max)	24 h
Number of place settings	13 place settings
Number of washing programs	8
Drying class	A
Annual water consumption	2800 L
Annual energy consumption	262 kWh
Water consumption per cycle	10 L
Energy consumption per cycle	0.92 kWh

Weight and Dimensions

Depth	548 mm
Width	598 mm
Height	820 mm