Grundig GNU 41820 X User Manual

34
DISHWASHER / USER INSTRUCTIONS
/55 EN
Maintenance and cleaning
4. Clean all three filters under tap water by
means of a brush.
5. Place the metal/plastic filter.
6. Place the coarse filter into the micro
filter. Make sure that it is properly
seated. Turn the coarse filter clockwise
until a "click" sound is heard.
C
Do not use the dishwasher
without filter.
C
Incorrect placement of the filters
will reduce washing efficiency.
Cleaning the hose filter
Damages on the machine that may be
caused by impurities coming from the urban
supply water or your own water installation
(such as sand, dirt, rust, etc.) can be
prevented by means of the filter attached to
the water inlet hose. Check the filter and the
hose regularly and clean them if necessary.
1. Turn off the tap and remove the hose.
2. After taking out the filter, clean it under
running tap water.
3. Place the cleaned filter back to its seat in
the hose.
4. Install the hose to tap.
(depends on model)

Grundig GNU 41820 X Specifications

General

Door color	Stainless steel
Control type	Buttons, Touch
Display type	LCD
Built-in display	Yes
Appliance placement	Undercounter
Control panel color	Black, Stainless steel
Noise level	44 dB
Delay start (max)	24 h
Number of place settings	13 place settings
Number of washing programs	8
Drying class	A
Annual water consumption	2800 L
Annual energy consumption	262 kWh
Water consumption per cycle	10 L
Energy consumption per cycle	0.92 kWh

Weight and Dimensions

Depth	548 mm
Width	598 mm
Height	820 mm