Grundig GNU 41820 X User Manual

DISHWASHER / USER INSTRUCTIONS
29 / 55
EN
Operating the product
Programming the washing
time
Time Delay
If an economical electricity tariff is applied
in your region, you can use the Time
Delay function to wash your dishes during
appropriate hours.
You can delay the start of the selected
programme up to 24 hours. Time Delay
cannot be set after the programme starts.
1. Press the Time Delay function key after
selecting the washing programme and
other auxiliary functions.
2. Once you press the Time Delay key,
Display Information Line will show
“0:00” and Time Delay indicator will
start flashing.
3. Press Time Delay key to set the time you
wish. Time will increase with increments
of 30 minutes up to 6 hours and after
that in 1 hour increments up to 24 hours
every time you press the key.
4. Press Start / Pause / Cancel key to
start countdown for the Time Delay.
Time Delay indicator and Start / Pause
indicator will light continuously until
the end of the period. Time Delay is
displayed on the Display Information
Line. Selected programme will start as
soon as the countdown is over.
Changing the settings while Time
Delay function is enabled.
While the Time Delay function is activated,
you cannot make changes in the washing
programme, auxiliary functions or the
duration of delay time.
C
Programme and auxiliary
functions cannot be set/changed
after the programme has started.
To cancel the Time Delay function
1. Press and hold Start / Pause / Cancel
key for 3 seconds.
2. When the Start / Pause / Cancel key is
pressed and hold, “3”, “2”, “1” appear
on the Display Information Line. Time
Delay indicator will go off at the end of
the cancellation process and delaying
process is cancelled.
C
You can select and start a
new programme following the
cancellation of Time Delay
function.
C
Time Delay function cannot be
set after the programme starts.
Starting the programme
To start your machine after selecting the
programme and auxiliary functions, press
Start / Pause / Cancel key.
Once the programme starts a tune is played
and the estimated time remained to the end
of the programme will appear on the Display
Information Line. Start / Pause / Cancel
indicator starts lighting continuously.
C
Your machine performs water
softening depending on the
hardness level of the supply
water. Remaining time displayed
towards the end in some
programmes can be different
from the time indicated at the
beginning due to this process.
The total time can also change
while the programme is running
depending on the ambient
temperature where your machine
is installed, temperature of the
supply water and amount of the
dishes.

Grundig GNU 41820 X Specifications

General

Door color	Stainless steel
Control type	Buttons, Touch
Display type	LCD
Built-in display	Yes
Appliance placement	Undercounter
Control panel color	Black, Stainless steel
Noise level	44 dB
Delay start (max)	24 h
Number of place settings	13 place settings
Number of washing programs	8
Drying class	A
Annual water consumption	2800 L
Annual energy consumption	262 kWh
Water consumption per cycle	10 L
Energy consumption per cycle	0.92 kWh

Weight and Dimensions

Depth	548 mm
Width	598 mm
Height	820 mm