Grundig GNU Series User Manual

13/
EN
Permitted water temperature: up to
25°C ( 60°C for products equipped
with WaterProtect+; please refer to
WaterProtect+ section )
The dishwasher may not be connected to
open warm water devices or flow-through
water heaters.
NOTICE Do not use an old or used water
inlet hose on the new product. Use the new
water inlet hose supplied with the product.
Do not make extension at the hoses.
NOTICE Connect the water inlet hose
directly to the water tap. Pressure coming
from the tap should be 0.3 bars minimum
and 10 bars maximum. If the water
pressure exceeds 10 bars, a pressure relief
valve should be installed in between.
NOTICE The water supply and draining
hoses must be securely fastened and
remain undamaged.
NOTICE Open the taps completely after
making the connections to check for water
leaks.
WaterProtect+
(depends on the model)
The WaterProtect+ system protects against
water leaks that may occur at the hose
inlet.Water contact with the valve box of
the system must be avoided to prevent
damage to the electrical system.
As the hose set contains electrical
connections and assemblies, never
shorten or lengthen the hose with
extension hoses.
If the WaterProtect+ system is
damaged, unplug the product and call
the authorised service agent.

Grundig GNU Series Specifications

General

Type	Freestanding
Cutlery Basket	Yes
Cutlery Tray	Yes
Dimensions (H x W x D)	85 x 60 x 60 cm
Water Consumption	9.5 L