31/
EN
OperatIng the product
6-
Keys
On/Off key
It is used to switch on or off the machine.
Press the On/Off key to switch on the
machine. A signal is heard and the machine
is switched on after 1 second with a
signal. Press the On / Off key for 1 second
to switch off. A signal will be heard and
machine is switched off after 1 second. To
switch off while the programme is running,
press and hold the Off key for 3 seconds.
A countdown in the form of “3”, “2”, “1” will
appear on the display. The machine will be
switched off after 3 seconds.
Machine will be switched on with the
economy programme in the On mode and
the number of the economy programme will
appear on the programme indicator. In the
Off mode, indicators on the display will turn
off.
Start / Pause / Cancel key
It is used to start, pause or cancel a
selected programme or function.
Programme Selection keys
They are used to select the washing
programme you determined from the
table of Programme data and average
consumption values.
Time Delay key
It is used to set the time delay duration.
Preparing the machine
1. Open the door of the dishwasher.
2. Place the dishes in accordance with
the instructions in the user manual.
3. Make sure that the upper and lower
impellers rotate freely.
4. Put adequate amount of detergent into
the detergent compartment.
5. Check if the Salt and Rinse Aid
indicators light and add salt and/or
rinse aid if needed.
6. Close the door of the dishwasher.
Programme selection
1. Press On/Off key to switch on your
machine.
2. Refer to the table of “Programme data
and average consumption values”
to determine a washing programme
suitable for your dishes.
3. Press Programme Selection keys until
the number of the programme you
selected appears on the Programme
indicator.
Auxiliary functions
Washing programmes of your dishwasher
are designed to obtain the best cleaning
effect, considering the type of the soiling,
soiling degree and properties of the dishes
to be washed.
Auxiliary functions are provided in order to
enable you to save time, water and energy
and to perform a more comfortable washing
with conditions specific to you.
Auxiliary functions may cause changes
in the programme duration.
Auxiliary functions are not suitable
for all washing programmes. Indicator
of the auxiliary function that is not
compatible with the programme will not
be active.
To add auxiliary function to the
programme:
1. Select the desired washing programme
by pressing the programme selection
key.
Read “Safety Instructions” section first!
Read “Quick Quide” before this
section.
To Next Page
Loading...
Need help?
General
