Grundig SONOCLOCK 600 - Power Supply; Insert back-up battery; Mains operation

ENGLISH
4
Insert back-up battery
The back-up batteries ensures that the stored set-
tings are not lost in the case of a power failure.
1 Open the battery compartment by pressing the
area market and pushing down the cover.
2 Observe the polarity marked on the base of
the battery compartment when inserting the bat-
teries (micro batteries, 2 x 1.5 V, LR3/ UM 4/
AAA).
3 Close the battery compartment.
Mains operation
Check that the mains voltage on the type plate cor-
responds to your local mains supply. If this is not
the case, contact your specialist dealer.
1 Plug the power adapter into the wall socket.
Caution:
7
The mains plug is used to disconnect the
device It shall remain readily operable and
should not be obstructed during intended use.
POWER SUPPLY
---------------------------------------------------------------------------------------------------------------