Setting the time
1 Switch the device to standby with »
ON/OFF
«.
2 Press and hold »
SET/TIME
« for two seconds to
activate the setting.
– Display: The time flashes.
3 Press »
TUN+/HR
« to set the hours.
– Display: The time flashes.
4 Press »
TUN–/MIN
« to set the minutes.
5 Press »
SET/TIME
« to confirm the setting.
Alarm mode
Setting the alarm time
Note:
7
The time must be correctly set.
1 Switch the device to standby with »
ON/OFF
«.
2 Press and hold »
ALARM
« for two seconds.
3 Press »
TUN+/HR
« to set the hours.
4 Press »
TUN–/MIN
« to set the minutes.
5 Press »
ALARM
« to confirm the setting.
6 Press briefly »
ALARM
« to select the desired
sound source radio station (»§«) or buzzer
(»
e
«).
– The device wakes you up at the set time, the
alarm duration is 59 minutes.
Interrupting the alarm
1 Press »
SNOOZE
O
« while the alarm is sound.
– The alarm signal (radio station or signal) stops.
– The alarm signal goes on again at nine-minute
intervals.
Cancelling the alarm
1 Press »
ON/OFF
« while the alarm is sound.
Activating and deactivating the alarm
1 In standby mode, press »
ALARM
« until the »
e
«
or »§« display disappear.
Sleep timer
1 To set the switch-off time (»120« – »I5« minutes),
press »
SNOOZE
O
« repeatedly.
2 To switch off the sleep timer before the set time
press »
SNOOZE
O
« to set the switch-off time
to »OFF«.
To Next Page
