Antenna
For the best FM (UHF) reception it is suffcient to
align the wire antenna accordingly.
Switching on/off
1 Switch the device from standby with »
ON/
OFF
«.
2 Switch the device to standby with »
ON/OFF
«.
Searching for and saving radio
stations – automatically
You can store 10 radio stations on presets.
1 Activate the station search by pressing »
TUN+/
HR
« or »
TUN–/MIN
« until the frequency dis-
play changes to rapid runthrough.
– The search stops when a station is found.
Note:
7
To move the frequency forward in steps,
briefly press »
TUN+/HR
« or »
TUN–/MIN
«
several times.
The frequency changes in steps of 50 kHz,
100 kHz are shown; at 50 kHz the last digit
of the particular frequency indicator flashes
briefly.
2 Press »
SET/TIME
« to activate the memory func-
tion.
3 Select the preset with »
PRESET+
« or »
PRESET–
«.
4 Press »
SET/TIME
« to save the station.
Note:
7
If stations are already stored on the presets,
they are overwritten when new stations are
stored.
5 To store more stations, repeat steps 1 to 4.
Selecting stored stations
1 Select the preset with »
PRESET+
« or »
PRESET–
«.
Adjusting the volume
1 Adjust the volume with »
– VOLUME +
«.
Setting the brightness of the
display
1 In Stand-by adjust the brightness in two levels
with »
DIMMER HI/LOW
«.
To Next Page
