20
4 To set further radio stations, repeat this procedure starting at pt. 2.
Note:
If no channel position is selected within 8 seconds, the device interrupts
the setting procedure. Start again at pt. 3.
Setting the time
Note:
If the time is not automatically set, select another channel position with
an RDS station by pressing »1 ... 10«, »
´´
« flashes in the display.
If an RDS time signal is received, the indicator »
´´
« is illuminated.
If your device cannot automatically set the time, you can enter the time
manually.
1 Switch off device with »ON/OFF«.
2 Press »TIME« and hold down.
3 Set the time with »+ «or»–«(TUNING).
– When »+ «or»–« (TUNING) are held down, the time can be set
more quickly.
Setting the day
1 Switch off device with »ON/OFF«.
2 Press »SNOOZE« and hold down.
3 Set the day with »+ «or»–« (TUNING).
Switching on/off automatic update
The automatic update of the time and the day can be switched off and then
on again.
1 Switch on the device with »ON/OFF«.
2 Press »TIME«.
– The indicator »
´´
« disappears, the update function is switched off.
3 Press »TIME« again.
– The indicator »
´´
« flashes. When the next RDS time signal is recei-
ved, the time and day are updated.
INSTALLATION
________________________________________
9: 00 MO
9: 30 M O
9: 30 M O
9: 30 F R
To Next Page
Loading...
