Basic functions
Switching on and off
1 Press »STANDBY«, »1…0« or »PR+« or »PR-« to switch on the
device from standby mode.
2 Press the »STANDBY« button to switch the television to standby
mode.
Selecting channels
1 Use »1…0« to select channels directly.
2 Press »PR+« or »PR-« to move up and down channels.
3 Open the channel list by pressing »OK« (digital presets), select
the station with »
Λ
« or »
V
« and press »OK« to switch off the
channel list.
Selecting stations from lists
You can select stations from various lists, (e.g. TV, favourites, FAV1).
1 Press »FAV« to call up the overview of channel lists.
– The overview is displayed.
2 Press »
Λ
« or »
V
« to select the channel list and »OK« to confirm.
3 Press »
Λ
« or »
V
« to select the channel and »OK« to confirm.
Selecting AV channels
1 Call up the »SOURCE« menu with »AV«.
2 Select the desired AV channel position with »
Λ
« or »
V
« and
press »
OK« to confirm.
3 Switch back to the television channel with »1…0«.
Switching between digital and analogue channels
1 Open the »SOURCE« menu by pressing »AV«.
2 Press »
Λ
« or »
V
« to select »DIGITAL« (digital presets) or
»ANALOG« (analogue presets) and press »
OK« to confirm.
Adjusting the volume
1 Adjust the volume with »VOL-« or »VOL+«.
Muting
1 Use » « to switch the sound off (mute) and to switch it on again.
TELEVISION OPERATION
------------------------------------------
18
To Next Page
Loading...
