Grundig VISION 2 19-2830 T - PC Monitor Mode; Connecting a PC to the Television; PC Settings Configuration

Connecting a PC
1 Connect the socket »PC-IN« on the television to the correspon-
ding socket on the PC using a VGA cable.
2 Connect the socket »PC AUDIO IN« on the television to the
corresponding socket on the PC using a cinch cable (audio
signal).
Note:
Adjust your PC to the monitor (for example, picture resolution
1280 x 768, picture frequency 60 Hz).
Selecting the channel position for the PC
1 Press »AV«, select the »PC« channel with » Λ « or » V « and press
»
OK« to confirm.
Settings for the PC
1 Press »MENU« to open the »MAIN MENU« menu.
– The »MAIN MENU« menu appears.
2 Select »SETUP« with » Λ « or » V « and press »OK« to confirm.
3 Select the function or setting you want with » Λ « or » V « and press
» « or » « to execute it.
– Options:
»AUTOCONFIGURATION« For automatic PC configuration;
»HORIZONTAL POS.« Adjust the picture position horizon-
tally;
»VERTICAL POS.« Adjust the picture position verti-
cally;
»PHASE« Remove horizontal flicker, blurring
and horizontal lines.
»CLOCK« Set the cycle frequency;
4 Press »EXIT« to exit the »SETUP« menu.
V
Λ
32
PC MONITOR MODE
----------------------------------------------------------
SETUP
AUTOCONFIGURATION
HORIZONTAL POS.
VERTICAL POS.
PHASE
CLOCK
d
Select
8
7
BACK
MENU
OK