Sleep function
Your world receiver is equipped with a sleep function. It
enables you to continue listening to the radio while you fall
asleep. After 90, 80, 70 .... 10 minutes the radio will be
switched off automatically.
Switching the sleep function on
• Press POWER to turn on the radio.
• Press the SLEEP button. The display shows the ‘SLEEP’
indication and the preset sleep time (‘60’).
• Keep H 3 or M 4 pressed until the desired sleep time
(10…90) is reached.
– The ‘SLEEP’ indication and the sleep
time you have selected will appear
on the display.
– After 5 seconds, the display will
switch to indication of the frequency.
Switching the sleep function off
The sleep function can be switched off before the set time has
elapsed:
• Press POWER once briefly.
– The ’SLEEP’ indication will disappear from the display.
• Press POWER once more to switch the radio off.
1 LOCK switch
By setting the 1 LOCK switch to the LOCK position, a function
is no longer interrupted when a button is accidentally touched.
The LOCK-position is very useful:
– when carrying the radio with you, radio reception cannot
be interrupted;
– when packing the radio or putting it away, it cannot be
switched on accidentally.
• Set the 1 LOCK switch in the ’lock’ position.
– The ‘LOCK’-symbol
will appear on the display:
• Now you can only adjust VOLUME,
FM MW SW1 SW2, MONO/STEREO and RADIO/BUZZ.
• Reset the 1 LOCK switch in order to switch the lock function
off again.
To Next Page
Loading...
Need help?
General