Grundig YB-P 2000 User Manual

HOME/DUAL time display priority
Your YB-P 2000 allows you to set two different times: HOME
and DUAL. Normally, the HOME time has priority. You can also
set the
DUAL time to be displayed constantly.
• The MODE button toggles the display between HOME, DUAL
and ALARM time indication. After 5 seconds, the display will
return to the previous indication.
• Press MODE once. The
DUAL time appears and the DUAL
indication starts flashing.
• Press MEMO/TIME SET to display the dual time constantly.
–
DUAL stops flashing.
• To display the home time constantly again, press MODE
twice and then MEMO/TIME SET while
HOME is flashing.
Setting the current time (HOME or DUAL)
• Press MODE to set the display in HOME or DUAL time mode.
• Press MEMO/TIME SET.
– The time digits start flashing.
• Use the H 3 button to set the hours and the M 4 button to
set the minutes.
– A single press of the H 3 or M 4 button advances the
setting by 1 hour or 1 minute respectively. If the button is
held pressed, the setting advances rapidly.
– The minutes will not be carried over to the hours if, for
example, the minutes indication changes from '59' to '00'.
• Press MEMO/TIME SET to store the setting
– If you do not press MEMO/TIME SET, the display will return
to the previous time setting after 5 seconds.
YB-P 2000 page 10
10
CLOCK ALARM
Alarm function
You can use your world receiver as an alarm clock. To use this
function you first have to set the alarm time. You will be woken
with a bleep, or by the radio.
Setting the alarm time
•
Press MODE repeatedly until ALARM starts flashing on the display.
• Press MEMO/TIME SET.
– The time digits start flashing.
• Use the H 3 button to set the hours and the M 4 button to
set the minutes (in the same way as the clock time).
• Press MEMO/TIME SET to store the setting
– If you do not press MEMO/TIME SET, the display will return
to the previous time setting after 5 seconds.
Selecting the alarm mode
• Use the RADIO/BUZZ switch to select the alarm mode.
Switching the alarm on
• Press ALARM.
–‘ALARM’ and the symbol for the
selected alarm mode (ɷ/ʍ) will
appear on the display:
Switching the alarm off
• Press ALARM.
– The alarm signs will disappear.
• When the alarm sounds, you can also switch the alarm off
by pressing the POWER button.

Grundig YB-P 2000 Specifications

General

Brand	Grundig
Model	YB-P 2000
Category	Receiver
Language	English