GS Engineering B.V. GS 1010 - Brush Control and Adjustment

To Next Page

To Previous Page

Instruction GS 1010

GS Engineering B.V.

manufacturer hydraulic sweepers

Do not replenish the fuel tank in a confined space.

Do not replenish the fuel tank when the engine is running. Wait at

least two minutes for the engine to cool down before refuelling.

Never turn on the engine when fuel has been spilled. Keep the

engine away from the spilled fuel and avoid ignition sources.

Wait for the fuel to evaporate.

3.3 Brush

3.3.1 Starting and stopping the brush

A control handle has been mounted bottom left next to the push bar to switch the

brush on and off.

The G/X 1010 has 3 brush positions:

1. To activate the brush, put the handle on "forward" (see Illustration 1). The

brush will now start to rotate in a forward direction.

Illustration 1