26
Instruction GS 1010
GS Engineering B.V.
manufacturer hydraulic sweepers
4.4 Maintenance and repairs
Maintenance and repairs to the machine must be carried out by a mechanic.
4.4.1 Hydraulic system
Maintenance and repairs to the hydraulic system must be carried out by a mechanic.
The hydraulic hoses installed on the machine must be replaced once every 5 years.
Do not use the machine when the hydraulic lines are damaged.
After a mechanic has replaced the hydraulic lines, the machine
can be used again.
If, however, injuries do occur in case of a leaking line, do not use
the machine and seek medical advice immediately.
Check the engine's hydraulic oil level each time before using the
GS 1010.
Type of hydraulic oil HLP.46
(available capacity of 4.5 litres)
Change the hydraulic oil after the first 50 hours.
After that, change the oil at least once a year or after every 300
hours of use. The oil filter must also be changed.
4.4.2 Engine
The machine is equipped with an engine that must be serviced at regular intervals.
Have the engine checked by a mechanic once a year or after a standstill of more
than 30 days.
To Next Page
Loading...