23
Instruction GS 1010
GS Engineering B.V.
manufacturer hydraulic sweepers
3. For backward position, push the handle away from you. The machine will now
move backward. (see Illustration 4)
Illustration 4
It is not allowed to install devices to lock the handle that controls
the machine's movements in a certain position. The installation of
such device or any other device of the same purport will result in
cancellation of the guarantee.
3.4.2 Speed adjustment
The speed of the GS 1010 can be easily adjusted by using the turning knob on top of
the push bar. (see Illustration 5)
Illustration 5
To Next Page
Loading...