Chapter 5: Enclosure Installation
6. Install the gate stop plate (16) to the plank (11) using bolts (9) and nuts (33).
7. Install the outside to inside catwalk support (14) to the plank (11) and the catwalk support clip (15)
using bolts (9) and nuts (33).
Figure 5-10 Catwalk support
9
3/8 x 1 in. flange bolt (S-7485)
15
Catwalk support clip
11
18, 24 and 30 ft. plank catwalk / platformk
16
Gate stop plate
14
Outside to inside catwalk support
33
3/8 in. flange nut LRG (S-968)
PNEG-2016 Tower Dryer Heat Reclaimer
75
To Next Page