116
PART 2
Intended Use
138692 Rev 0 (04/22)
Section B. Intended Use
GT Bicycle Owner’s Manual
Intended Use
Intended Use tables on the following pages contain information from GT, the ASTM International (ASTM), as
well as information required by the European Committee for Standardization (CEN). All table information is
part of the picture of intended use for your bike.
Conditions 1-4 are part of the ASTM F 2043 voluntary standard in use by the bicycle industry. The tables
include the graphic and description text directly from the standard.
ASTM F2043
Suitable for
road riding
(only)
ASTM F2043
For o-road
riding and
jumps less than
12” (30cm)
ASTM F2043
For rough
o-road riding
and jumps less
than 24” (61 cm)
ASTM F2043
For extreme
o-road riding
For extreme riding
User caution advised
Model names listed in the “MODELS” headin\g includes several recent model years and model variations
in component and color. (e.g., SuperSix Team, SuperSix DI2, SuperSix RED, SuperSix 105, etc.)
If you have any questions, about intended use or the information presented in the tables, please ask your
Authorized Dealer.
For information on the F-2043 ASTM International standard, see http://www.astm.org.
To Next Page
Loading...
