84
PART 2
No Modifications
138692 Rev 0 (04/22)
Section A. Important Safety Information
GT Bicycle Owner’s Manual
No Modifications
WARNINGS
DO NOT physically alter your frame in any way.
Don’t sandblast, shot blast or glass bead your frame.
Don’t use any coarse sandpaper on your bike.
Don’t grind, wire brush, file, scrape or machine buff your frame.
Don’t weld, braze or let anyone touch your frame with a torch. Don’t drill any holes in your frame. Don’t
acid dip or etch your frame.
Don’t anodize or chrome plate your frame. Any of these procedures will seriously harm the structural
integrity and/or longevity of your frame, which could lead to serious accident and injury. Modifications
will void any applicable warranty.
Modifying the E-bike and drive assist system could result in damage to the drive system, faulty or
dangerous operating conditions, or violation of rules, regulations and laws related to the use of an
E-bike. Never modify the E-bike or its parts for any reason.
Attempts to “hot-rod” or “improve” the speed of the bike can be dangerous to the rider. Only use
specified drive-assist service and replacement parts. Failure to do so may void the product warranty.
To Next Page
Loading...
