Gtech AirRam AR20 - Cleaning the Filters; Filter Removal and Basic Cleaning; Filter Washing and Drying

10
Holding onto the AirRam with one hand,
pull the bin handle and lift the bin out of
the AirRam.
Remove the lter from the inner shroud, by
twisting and pulling.
Wash the lter under a tap. Squeeze out
any excess water then let it dry completely
before reinserting into the AirRam.
Pull the lter out of the lter housing.
Tap the dirt from the lter and tip any dirt
from the lter housing.
Wash the lter if necessary.
Cleaning the lters - do this once a month