Why has my Gtech Vacuum Cleaner AirRam stopped working?
If your Gtech AirRam vacuum cleaner has stopped working, try charging the battery. Also, clear any debris from the brush bar, as this might be the cause.
What to do if my Gtech AirRAM AR05 Vacuum Cleaner AirRam is not cleaning well?
If your Gtech AirRam vacuum cleaner isn't cleaning effectively, start by emptying the bin. Ensure the bin and filter are correctly fitted. If the problem persists, clean the filter.
How to troubleshoot a Gtech AirRAM AR05 battery that will not charge?
If the battery of your Gtech Vacuum Cleaner will not charge, check all connections to make sure they are secure. Also, verify that the wall socket you are using is working properly.
Why does my Gtech Vacuum Cleaner have poor cleaning and dust pick up?
Poor cleaning and dust pick up with your Gtech Vacuum Cleaner can occur if the dust bin is full. Remove and empty the dust bin to resolve this. Also, check if the dust bin or the filter is not correctly fitted to the unit and refit them correctly. A dirty filter can also cause this issue, so ensure you clean the filter.
What to do if my Gtech Vacuum Cleaner stops during use?
If your Gtech Vacuum Cleaner stops during use, it could be due to a discharged battery. Charge the battery to continue using the vacuum. Another cause might be a brush bar jam. If this is the case, remove the battery and clear any debris from the brush bar.
Why will my Gtech Vacuum Cleaner not operate?
Your Gtech Vacuum Cleaner may not operate because the battery is discharged. Try charging the battery. Another potential cause is a brush bar jam. To fix this, remove the battery and clear any debris that is obstructing the brush bar.
General| Weight | 3.5 kg |
|---|---|
| Battery Life | 40 minutes |
| Charging Time | 4 hours |
| Filtration | Washable filter |
| Battery Voltage | 22 V |
| Power Source | Battery |
| Noise Level | 75 dB |
| Type | Cordless |
| Dust Capacity | 0.8 liters |
Details the brush bar jam indicator, its meaning, and steps to resolve the issue.
Explains LED patterns for battery depletion, charging, and full charge status.
Crucial warnings about using only approved battery packs and chargers for safety and warranty.
Essential safety guidelines for cleaning and maintaining the vacuum, including what not to use.
Addresses common problems like poor cleaning, unit not operating, stopping, or not charging, with their solutions.
To Next Page
