Gtech AirRAM AR05 - Care and Maintenance; Care and Maintenance Safety; Troubleshooting; Common Issues and Solutions

• Each week clean the product with a dry cloth, including under the bin.
• Remove hair and fibre from the brush bar, cutting along the brush with scissors can help,
but be careful not to cut the bristles.
• Do not pick up liquids or use on wet floors.
• Don’t use on concrete, tarmacadam or other rough surfaces.
• Do not pick up pieces of string or fabrics.
• Do not use on rug tassels or frayed carpets.
• Do not store or charge the appliance outdoors.
• Store indoors in a dry place.
• Store out of reach of children.
• Any other maintenance or servicing not included in the manual should be performed by an authorized
service representative.
Troubleshooting
Problem Possible Reason Possible Solution
Poor cleaning and
dust pick up.
1. Dust bin full. Remove and empty dust bin.
2. Dust bin not correctly fitted to unit. Check dust bin is correctly fitted.
3. Filter not correctly fitted to unit. Check filter is correctly fitted.
4. Filter dirty. Clean filter.
Unit will not operate. 1. Battery discharged. Charge battery.
2. Brush Bar jam. Remove battery.
Remove debris.
Unit stops during
use.
1. Battery discharged. Charge battery.
2. Brush bar jam. Remove battery.
Remove debris.
Unit will not charge. 1. Check the charger is correctly
connected to the battery and socket.
If the vacuum still does not start, please call the Gtech Customer
Services Helpline.
2. Check that there is power going to the
wall socket.
If socket is faulty consult a qualified electrician. If the product still
does not charge, please call the Gtech Customer Services Helpline
on 1-855-483-2440
Warning:
Do not use water, solvents,
pr polishes to clean the
outside of the unit. Wipe
with a dry cloth.
Warning:
Never immerse the unit in
water and do not clean in a
dishwasher.
Warning:
Never use the unit without
the filter fitted.
7
english
Care and Maintenance
Before cleaning or maintenance switch off and remove the battery pack.